| “The LPS Embedded Controller Experiment Board” (Made in USA)
This Experiment board comes with Assembly Code Instructions, Cables, the Flash Memory Programming Software, the Board Schematic, Lab Experiment Instructions, the Microchip Assembly Code Compiler MPLAB_IDE 8.1 (do not use any of the later versions), and Working C-Code & PICBasic-Pro code for all Laboratory Experiments. Just Download the Free Microchip PIC18F4550 Datasheet (www.microchip.com) and you will have all of the Material necessary to learn about the PIC18F4550 Microcontroller. Additionally, the ATMEL ATF22V10C Electrically Erasable/Programmable Logic Device is provided for use with the experiments.
Designed by a Professor from a Major University with 30 Years of Industrial Experience
The Ultimate Microcontroller Teaching Tool for the Classroom or Laboratory
Ideal for the Professor or Instructor who wants to Upgrade an Existing Course
The Perfect Learning Device for the College Student or the Vocational School Student
The Experiment Board Combines Real-World Analog Circuits with the very Popular PIC18F4550 Microcontroller within a 40-Pin DIP. The PIC16F877, PIC18F452, 458, 4525, 4585, 4620 & 4680 Microcontrollers may also be used with this experiment board.
This Board is powered from the USB Port of any Personal Computer and provides for “In-Circuit-Programming”, USB Bootloader Programming,"In-Circuit Debug" and it will Program any other Microchip Microcontroller or DSP through an Off-Board Connector. The "In-Circuit-Debug" feature is not available when programming the Microchip Microcontroller or DSP through the Off-Board Connector.
Fully Compatible with:
The Microchip C18 C-code Compiler and the Assembly Code MPLAB_IDE Compiler 8.1
The Custom Computer Services PCH C-Code Compiler
The MicroEngineering Labs PICBasic-Pro Compiler
The MicroEngineering Labs Microcode Studio Plus ICD Editor
The MicroEngineering Labs MEProg Flash Memory Programmer
The WinPIC800 Flash Memory Programmer
A Lab Apparatus Board which includes a Stepper-Motor with an LED and an IR Devices, a DC-Fan with Hall-Effect Sensor, a +12V Regulator, 3 LED Cluster Lamps and a Speaker, is Sold Separately. All Editors and Compilers, Except for the Assembly Code MPLAB_IDE 8.1 Compiler, are also Sold Separately.
The Laboratory Experiments: (Fully Tested)
1. “Loop-Timing & Serial RS232 Computer Communications”
2. “Keypad, Light-Emitting-Diodes, Liquid-Crystal-Display, Relays & Sound Generation”
3. “Digital Brushless Fan Speed Regulator”
4. “Digital Voltage Regulator”
5. “Digital 4-Phase Stepper Motor Controller “
6. “Electronic Thermometer”
7. “I2C Real-Time Programmable Clock/Calendar”
8. “Digital Volt-Ohm Meter and Frequency Counter”
9. “Digital Function Generator”
10. “Variable Bandwidth Digital Low-Pass Filter”
11. “Frequency and Phase Modulation”
12. “Voice Recording”
The Experiment Board Includes the Following:
- Removable PIC18F4550 in a 40-Pin DIP Package
- 20 Mega-Hertz Crystal
- 1 USB Connector
- 1 Lithium Coin Battery
- 1 Temperature Sensing Negative Temperature Coefficient Thermistor
- On-Board Programming Hardware with External DB9 Connector (Non-RS232)
- Liquid-Crystal-Display (16-Character, 2-Line, 5x8 Dots, Reflective)
- Telephone Keypad, 3 I/O DIP Switches and a Master Reset Control
- 1 DB9 Serial-Port with RS232 Voltage Levels
- Sound Output and an Open Drain Driver on Separate Output Connectors
- Relay (10A, 125VAC Contacts) on a Separate Output Connector
- 1-Red, 1-Yellow, & 1-Green LED
- Battery-Backed RAM I2C Real-Time Clock with a Separate crystal on a Separate I2C Connector
- A 4-Phase, 1/2 Ampere per Phase, Stepper-Motor Driver
- 2 Pulse/Frequency Counting Input Circuits on Separate Input Connectors
- A 1 Amp, Digital Switching Voltage Regulator with Separate I/O Connectors
- An ATMEL ATF22V10C Electrically Erasable/Programmable Logic Device
- Two 7-segment Character-Numeric Displays with a D-Type Latch Interface
- A 256K Serial EEPROM (32Kx8)
- Two Buffered Analog Input Circuits with Selectable AC or DC Input Coupling on Separate Input Connectors
- An 8-Bit R-2R Ladder DAC with a 4-Value Selectable Reconstruction Filter, with AC or DC Output Coupling on a Separate Output Connector
$199.00
Per Board
If you are interested in purchasing this product or would
like more information please email: jankeney@l-p-s.com
or call 561-393-4710 |
|
