| 64OUT-VME
64 Channel, Isolated, VME Output Board
| GENERAL DESCRIPTION
The 64OUT-VME is a complete, electrically isolated, 64
channel output board with an operating range of 9V to 50V
at 250mA per channel. The board can be configured to sink
or source in banks of four. The device completely isolates
the field outputs from the digital logic. The 64 outputs are
routed to the board via two front panel mounted DB50 male
connectors. Isolation from the field outputs to the logic
is 2500VRMS for one minute, which makes it ideal for applications
with high transient voltages and different ground potentials.
The 64OUT-VME board is a standard 6U design with a complete
VME interface. The board provides up to 16 unique jumper selectable
address locations for mapping the board to memory. |
|
FEATURES
• 64 Isolated Sink/Source Outputs
• Output Range is 9V to 50V
• Output Current is 250mA/Channel
• 2500VRMS Isolation
• VME Interface
• 16 Selectable Board Addresses
• Operation from -40 0 C to +85 0 C
• UL and CSA Approval Pending
APPLICATIONS
• High Transient Environments
• High Ground Potential Differences
• High Noise Environments
SNKQI Output Stage Electrical Characteristics
SRCQI Output Stage Electrical Characteristics
Board and Chip Select Generation
The base address for the 64OUT-VME is factory set at C00xxxH
(BA23 – BA0). The tables below allow the user to configure the board
to operate in a certain segment of memory space. The Board Mapping
table illustrates the jumper placements required to put a board
in a certain position within memory space. There are 16 possible
locations. Once the board has been positioned in a general portion
of memory space the Board Chip Select Addressing table illustrates
where each of the four Bank Chip Selects will reside.
Board Mapping
Board Chip Select Addressing
Block Diagram of the 64OUT-VME
DOWNLOAD/PRINTOUT
Download or printout an Online Brochure
in .pdf format.
VME OUTPUT BOARD.pdf
Back
to products
RS232DI
• SNKQI &
SRCQI • DIGINQI
• 64IN-VME •
64OUT-VME |
